Skip to content

AlmaLinux System Requirements ​

This guide details the hardware and software requirements for AlmaLinux across different deployment scenarios, helping you choose the right configuration for optimal performance and stability.

Minimum System Requirements ​

The latest stable releases are AlmaLinux 10 (kernel 6.12) and AlmaLinux 9 (kernel 5.14). AlmaLinux 8.10 is the final release of the 8 series; its mainstream support has ended and only security maintenance is provided, so new deployments should choose 10 or 9.

AlmaLinux 10 ​

ComponentMinimumRecommendedNotes
Processorx86_64, aarch64Multi-core processor64-bit instruction set required
Memory1 GB4 GB or more8 GB+ recommended for server environments
Storage10 GB50 GB or moreExcluding user data
NetworkOptionalWired/wireless networkRequired for installation and updates

AlmaLinux 9 ​

ComponentMinimumRecommendedNotes
Processorx86_64, aarch64Multi-core processor64-bit architecture required
Memory768 MB2 GB or moreMore needed for desktop environments
Storage8 GB30 GB or moreFor a basic installation
NetworkOptionalEthernet connectionRecommended for online installation

AlmaLinux 8 ​

ComponentMinimumRecommendedNotes
Processorx86_64Multi-core processorBest compatibility
Memory512 MB1 GB or moreMinimal installation
Storage6 GB20 GB or moreBasic system configuration
NetworkOptionalNetwork connectionFor package installation

Architecture Support Details ​

x86_64 (AMD64/Intel 64) ​

bash
# Check the CPU architecture
uname -m
# x86_64

# Check CPU features
lscpu | grep Flags
# Confirm support for the 64-bit instruction set

Compatible processors:

  • Intel Core series (2nd generation and later)
  • AMD Ryzen series
  • Intel Xeon series
  • AMD EPYC series
  • Other processors supporting the 64-bit instruction set

aarch64 (ARM 64-bit) ​

bash
# ARM64 architecture verification
cat /proc/cpuinfo | grep processor
# Displays ARM processor information

Compatible hardware:

  • ARM Cortex-A57 and later
  • Apple M1/M2 chips (virtual machine mode)
  • Qualcomm Snapdragon server chips
  • Huawei Kunpeng processors
  • Phytium processors

ppc64le (Power PC 64-bit little-endian) ​

Supported hardware:

  • IBM POWER8 and later
  • IBM Power Systems
  • OpenPOWER-compatible systems

s390x (IBM Z series) ​

Supported hardware:

  • IBM z13 and later
  • IBM LinuxONE series
  • z/VM virtual environments

Memory Requirements Explained ​

Memory Configuration for Different Uses ​

🖥️ Desktop Environments ​

Desktop EnvironmentMinimum MemoryRecommended MemorySmooth Operation
GNOME2 GB4 GB8 GB
KDE Plasma1.5 GB3 GB6 GB
XFCE512 MB1 GB2 GB
LXDE256 MB512 MB1 GB

🖧 Server Environments ​

bash
# Web server (Apache/Nginx)
Minimum: 1 GB, Recommended: 4 GB, High load: 16 GB+

# Database server (MySQL/PostgreSQL)  
Minimum: 2 GB, Recommended: 8 GB, Production: 32 GB+

# Application server (Java/Node.js)
Minimum: 2 GB, Recommended: 8 GB, Large applications: 64 GB+

# Container environment (Docker/Podman)
Minimum: 2 GB, Recommended: 16 GB, Large scale: 128 GB+

☁️ Virtualization Environments ​

bash
# KVM host
Basic: 4 GB, Recommended: 16 GB, Enterprise-grade: 64 GB+

# Container orchestration (Kubernetes)
Control node: 4 GB, Worker node: 8 GB, Cluster: 32 GB+

Storage Requirements ​

Disk Space Allocation Recommendations ​

Basic Partition Layout ​

bash
# Minimal partition layout
/          - Root partition: 15 GB
/boot      - Boot partition: 1 GB
swap       - Swap partition: equal to memory size

# Recommended partition layout  
/          - Root partition: 50 GB
/boot      - Boot partition: 1 GB
/home      - User directory: remaining space
/var       - Variable data: 20 GB
swap       - Swap partition: 1.5 times memory size

Server Partition Layout ​

bash
# Production server layout
/          - Root partition: 50 GB
/boot      - Boot partition: 1 GB
/var       - Logs and data: 100 GB+
/var/log   - Log directory: 50 GB
/home      - User directory: allocate as needed
/tmp       - Temporary files: 10 GB
swap       - Swap partition: 16-32 GB

Storage Device Compatibility ​

Traditional Hard Disks (HDD) ​

  • SATA 3.0: recommended interface
  • Rotation speed: 7200 RPM or higher
  • Capacity: 500 GB or more
  • Use cases: data storage, backups

Solid State Drives (SSD) ​

bash
# Check SSD support
lsblk -d -o name,rota
# rota=0 indicates an SSD, rota=1 indicates an HDD

# Check TRIM support
fstrim -v /
  • Interfaces: SATA 3.0, M.2, NVMe
  • Capacity: 250 GB or more
  • Use cases: system disk, databases

Enterprise Storage ​

  • NVMe SSD: high-performance needs
  • SAS HDD: enterprise reliability
  • RAID configuration: data redundancy protection

Network Requirements ​

Network Adapters ​

bash
# View network devices
ip link show
# Or
nmcli device status

# Check network speed
ethtool eth0 | grep Speed

Supported Network Standards ​

  • Ethernet: 10/100/1000/10000 Mbps
  • Wi-Fi: 802.11n/ac/ax
  • Fiber: SFP/SFP+ interfaces
  • Virtual networking: Bridge, VLAN, Bond

Bandwidth Requirements ​

Installation Phase ​

bash
# Network installation bandwidth requirements
Minimal installation: 100 MB download
Full installation: 4 GB download
Recommended bandwidth: 10 Mbps or higher

Operational Phase ​

bash
# System update bandwidth
Security updates: 10-100 MB/month
Full updates: 500 MB-2 GB/month
Recommended bandwidth: 5 Mbps or higher

Graphics Card Requirements ​

Graphics Requirements for Desktop Environments ​

Integrated Graphics ​

bash
# Check Intel integrated graphics
lspci | grep VGA
# Intel Corporation UHD Graphics

# Check AMD integrated graphics  
lspci | grep VGA
# AMD/ATI Device
  • Intel HD Graphics: 4000 series and later
  • AMD Radeon: R5 series and later
  • Video memory: 512 MB or more

Discrete Graphics ​

bash
# NVIDIA graphics driver
sudo dnf install nvidia-driver
# Requires the EPEL and RPM Fusion repositories

# AMD graphics driver
sudo dnf install mesa-dri-drivers
# Open-source driver is built in
  • NVIDIA: GTX 600 series and later
  • AMD Radeon: HD 7000 series and later
  • Video memory: 1 GB or more

Server Environments ​

bash
# Headless server
No graphics card required; managed via SSH/Web

# GPU computing (CUDA/OpenCL)
NVIDIA Tesla, Quadro series
AMD Instinct, FirePro series

Virtualization Requirements ​

Virtual Machine Environments ​

VMware ​

bash
# Install VMware Tools
sudo dnf install open-vm-tools
sudo systemctl enable --now vmtoolsd
  • VMware Workstation: 15.x and later
  • VMware vSphere: 6.7 and later
  • Memory: less than 50% of the host's memory

VirtualBox ​

bash
# Install Guest Additions
sudo dnf groupinstall "Development Tools"
sudo dnf install kernel-devel
# Insert the Guest Additions CD
  • VirtualBox: 6.0 and later
  • Virtualization technology: Intel VT-x / AMD-V
  • Memory: dynamic allocation recommended

KVM/QEMU ​

bash
# Check virtualization support
egrep -c '(vmx|svm)' /proc/cpuinfo
# A value greater than 0 indicates hardware virtualization support

# Load KVM modules
sudo modprobe kvm
sudo modprobe kvm_intel  # Intel processors
sudo modprobe kvm_amd    # AMD processors

Container Environments ​

Docker/Podman ​

bash
# Check system requirements
uname -r
# Kernel version 3.10 or higher

# Storage driver support
lsmod | grep overlay
# OverlayFS file system support
  • Kernel version: 3.10 and later
  • Storage driver: overlay2 recommended
  • cgroups: v1/v2 support

Special Environment Requirements ​

High-Availability Environments ​

bash
# Minimum cluster configuration
Number of nodes: 3 or more (odd number)
Heartbeat network: dedicated network connection
Shared storage: SAN/NAS storage
Load balancing: hardware or software LB

Security Environments ​

bash
# Security compliance requirements
FIPS 140-2: cryptographic module certification
Common Criteria: security evaluation standard
TPM 2.0: Trusted Platform Module
Secure Boot: secure boot support

Embedded Environments ​

bash
# Raspberry Pi 4B configuration
Processor: ARM Cortex-A72 1.5GHz
Memory: 4 GB LPDDR4
Storage: 32 GB microSD (Class 10)
Network: Gigabit Ethernet + Wi-Fi

Performance Benchmarking ​

CPU Performance Testing ​

bash
# sysbench CPU test
sudo dnf install sysbench
sysbench cpu --cpu-max-prime=20000 run

# Multithreaded test
sysbench cpu --threads=4 --cpu-max-prime=20000 run

Memory Performance Testing ​

bash
# Memory bandwidth test
sysbench memory --memory-total-size=10G run

# Memory latency test
sysbench memory --memory-oper=read --memory-total-size=1G run

Disk Performance Testing ​

bash
# Disk I/O test
sudo dnf install fio
fio --name=random-rw --ioengine=posixaio --rw=randrw --bs=4k --size=1g --runtime=60

# Sequential read/write test
dd if=/dev/zero of=testfile bs=1G count=1 oflag=dsync

By configuring hardware resources appropriately, AlmaLinux can deliver excellent performance and stability across a wide range of environments. We recommend selecting the right configuration based on your specific use case.

Released under the MIT License